Support

Customize default report card

In the administrator view of the ThinkWave system, click on the "Reports" tab at the top of the screen.  Then click the "Add Report" button in green in the upper left.
 
Give your report card a title.  Then, in the box below that, select from the drop-down menu if you want your report to include one student per page or a single multi-page report.  The last box asks you if you want to display the report in portrait or landscape view.
 
The next part gets into the heart of your report.  The "Layout" items determine how your report will look.  The "Widgets" will determine the content you will see in the report.
 
Layout:
 
The Rows determine the vertical layout of the report and the cells make up the horizontal layout of the report.
 
In the "Row" menu you must choose how many sections you want on your page (from top to bottom) and how much space you want each section to take up vertically.  These operate as parts in a whole of 12.  So, a full page from top to bottom would be 12/12. 
 
For example, if you want your page to have three sections: a header, body of report and a footer then you need to figure out how much room each section will take up.  Since you want three parts, click "Add Row" until you have options for three rows.  A header is usually short and only takes up a couple of rows on a page, so you might choose your first row set as 3/12.  The body of the report is the longest so that would take up, say, 7/12.  Finally, the footer is also short and to complete your whole of 12, you would choose 2/12 for your footer.
 
After deciding on the rows, it's time to decide how big your cells will be.  Cells are horizonal so think of them as taking up width on the page.  You also have to make them equal a whole of 12.  If you want them to take up the entire page horizontally then make each cell value 12.  If you want to delete a cell, make the value "0" and the system will prompt you to delete it.  Click "Save" when you are finished.
 
Widgets:
 
Select the "Widget" sub-tab at the top of the screen. Give it a name like "Header".  The next field is where you select what type of field you want from a drop-down menu.  You have options like: text, table, image etc.  The last pull-down menu asks where you would like to save the widget; select the name of the custom report you just created. 
 
If you chose a table widget, your next screen will give you the options for your table like numbers of rows and columns.  Make sure in the "Contents" fields that the number of columns adds up to 12 again. 
 
Underneath the number of columns you have the cells where you will input the information for the widget.  You can type in the content manually or use a merge function to create customizable commands to create automations displaying different data.  At the bottom of every widget screen there are instructions for the merge functions.  You will see the commands, their descriptions, their variables and the samples.  You can copy and paste the samples in to your information cells to customize your data.  This process is described in more detail in another section.  Please refer to this video for more information.
 
For now, lets start by putting the name of the widget in to create the header.  Type in "Report Card" in the first cell.  Then hit "Save".  Return to the "Layout" sub-tab at the top to input the newly-created report title widget in the cell.  Under "cell" where it says "Widget to put into this column" select "Header" or whatever title you gave your widget.  Click "save".   You can now preview your report.  There's an orange button that says "Preview" at the top right.  This will only preview the widget you are currently looking at.  
 
Hint: It's faster to have another tab opened in ThinkWave to Custom Reports so you can quickly preview your custom report while generating it.
 
Open a new tab in ThinkWave and click on "Reports" at the top.  Under "Custom Reports" select the name of the custom report you are working on.  Then, select a student who you know has information in his/her profile.  Click the green "Generate" button.  You will see a live display of the report you have created so far.  Right now, it's just a header but you can get an idea of placement and size on the page.  Since you have the report card widget open in your other tab, you can click over to that and modify your widget by increasing size or changing the alignment of your text to be centered or left justified until you like the way it looks.  Keep adjusting and previewing until you are satisfied.  Each time you go back to the preview tab click "Customize This Report" in the upper left, select a student and hit "Generate" again to see your changes.
 
You can keep adding widgets to include infomation like student address, term etc.  If you want to add another line of information, an address for instance, you would click the “add widget” button in the upper left.  Make it another table widget.  This time, we're going to use the merge functions at the bottom of the screen.  Find the merge function that says “student name”.  Copy and paste it into the cell.  Then, do the same for the merge function that says “student address” in the cell underneath “student name”.  If students have more than one address line, you can use the “skip row” function built into the table widget so that if there is no data available for a student's second address line, the program will skip it automatically.  Copy and paste the “student address line 2” merge function from the bottom and paste it into the cell below “student address”.  Then, be sure to select “skip row if any merge field is blank” under the “skip row” line in the overall setup fields for the address table widget.  Continue to add the “student city”, “student state” and “student postal code” into the cells next to each other so that they will appear that way on the finished page.  Click save, when you are done adding the student address merge functions.
 
Column Widget:
 
Now, you need to add the overall widget to the report card.  You have to create a column where you add the widgets stacked on one another.  Navigate back to the upper left and click “add widget”.  Call it “Report Card Column”.  Under “Widget Type” select “Column” from the drop-down list. 

Under the heading “Widgets to Display in a Series” select the order you would like things displayed.  You can select “Report Title” first and then add a “Half Space” to go in between and then add in more widgets.  To see how it looks, go to the “Layout” sub-tab and add the “Report Card Column” to the area that says “Report Title”.

Make sure to preview your report card often to see if you like the way it looks.  You can always remove a space or move things around.  If you want to quickly access your widget to make changes to the way it looks, click the “widgets” sub-tab at the top.  You can see a drop-down menu of all the widgets associated with “Report Card” on the left side of the screen.  You can also click the edit icon to the right of the widget.  Once in the widget, you can select the size of each line in the drop-down fields to the right of each line.  Or, to have all the lines the same size, choose the drop-down menu below the lines of the cells you put in earlier.

Adding Classes and Grades:

Create a new widget to add classes and grades.  This will probably be the body of your report.  Give it a title like “Class Cycler” since you will be using the “Class Cycler” widget. 

Once you have done this, you need to create a “Class Grades” widget, so add a widget again and name it “Class Grades”.  Make it a table widget.  Then, you have to choose how many terms to display. 

You must first determine how many terms your ThinkWave system has by going to the “Setup” tab at the very top.  Under “Schedule” click on “Terms and Subterms”.  If you have two semesters and four quarters there are a total of six terms to display.  Go back to the “Class Grades” widget. 

If you want to display the class name as well, you will need to make sure your table has seven columns and one row.  Use the drop-down menus to add those to your table widget.  Don't forget, the columns must still add up to 12. 

If you need a little more space, you can use the drop-down menu under “max columns” to multiply the amount by 12.  So, you can choose “5x” and now the margins of the columns will be 60 instead of 12.   At the top of each column choose how much space you want it to take up as you did with your layout section.  They must now add up to 60.  The system will tell you if your columns do not add up properly.  Click “Save”.

For the first cell, you'll probably want the class name.  Go to the bottom of the screen where the merge functions are, and find the one for “class ”.  For the grades, you will need some modifiers to keep things specific.  Go to the merge function for “final grades” and choose the third column line to copy and paste; that will give you a sample which includes most of the information you want to display instead of selecting each modifier. 

Put that whole line into the second cell beside the class name.  Since the line example we copied and pasted has term_2 listed, you will need to change this to the term you want to display.  If you want to display the grades as a letter grade you will need to remove the percentage part of the merge function (percent:true) that was copied and pasted.  Otherwise, the grade will display as a percent.  You can now copy and paste your modified command into the rest of the columns.  Make sure you change the term number for each one so you can display the grades for each term.  Click “Save” when you are finished.  Now, lets add this table to the “Class Cycler”.  Click on “Class Cycler” on the left side of your screen.  Then, under the heading “widgets to display for each class” select “Class Grades [table]” from the drop-down menu.  Then click on the “Report Card Column” on the left side so we can add the “Class Cycler” to it.  Click the “add widget” button under “widgets to display for each class” and add your widget underneath your current setup of “Report Title – Half Space – Student Address” etc.  by choosing it from the drop-down menu.  You may want to add a half space or other rule above it before adding “Class Cycler” to the list.  Click “Save” and then check it.  You should see a pull-down menu for each term.  You'll have to manually select each one so that Term One reads “1st quarter” etc.  Then, select a student and hit “Generate".  You will see the final version of how the report card will look.  If you don't like the way it looks, you can go back in and add spaces or lines as needed.

 
 
 
 
 
 
 
 
 
 
 
  • Header – you can upload your logo or designate blank space on top in order to use your letterhead. Change report title if needed.
  • Custom Fields – designate custom fields along with associated data and print those custom fields. Enter data for those custom fields in the Students tab.
  • Custom Text – Include custom text on the bottom. Include signature line. Change font size on custom text.
  • Layout – designate portrait / landscape.
  • Credits – edit / override credits earned in the Final grades tab.
  • Multi-Term – Include multiple terms on one report card. Student IDs connect student data year-to-year in the transcript. Total credits and GPA are summed automatically.